13000 / 13113 - katedra elektrotechnologie

Publikační činnost 2025

Články v časopisech WoS

DANOS, L. et al. Photosensitised silicon solar cells: progress and challenges. Chemical Communications. 2025, 61(67), 12449-12466. ISSN 1364-548X. DOI 10.1039/D5CC02567B. Dostupné z: https://pubs.rsc.org/en/content/articlelanding/2025/cc/d5cc02567b

REMEŠ, Z. et al. Optical, electrical and surface properties of bare and Al-doped nanocrystalline ZnO (AZO) thin films grown by pulsed laser deposition (PLD) on commercial interdigital electrodes (IDE). Physica Scripta. 2025, 100(11), 1-8. ISSN 0031-8949. DOI 10.1088/1402-4896/ae1897.

PRAŽANOVÁ, A. et al. Optimized Thermal Treatment of Lithium-Ion Battery Components as a Basis for Sustainable Pyrometallurgy. ChemSusChem. 2025, 18(24), 1-12. ISSN 1864-564X. DOI 10.1002/cssc.202501753.

CTIBOR, P. et al. Calcium stannate dielectrics compacted by spark plasma sintering. Materials Science and Engineering: B. 2025, 317 ISSN 0921-5107. DOI 10.1016/j.mseb.2025.118203.

MARKVART, T. Thermodynamic limit on the open circuit voltage of solar cells. Progress in Photovoltaics: Research and Applications. 2025, 33(5), 663-665. ISSN 1062-7995. DOI 10.1002/pip.3903.

CAPKOVA, D. et al. Experimental study on cycle aging of 3.4 Ah lithium–sulfur pouch cells: Temperature and current investigation. Chemical Engineering Journal. 2025, 525 1-11. ISSN 1385-8947. DOI 10.1016/j.cej.2025.170341.

CHOI, H., B. ILLÉS a K. DUŠEK. Sn Whisker Growth Mitigation by Modifying the Composition of the Solder Alloys: A Brief Review. Materials. 2025, 18(5), ISSN 1996-1944. DOI 10.3390/ma18051130. Dostupné z: https://www.mdpi.com/1996-1944/18/5/1130

XIAO, Y. et al. Electrochemical Impedance Spectroscopy-Based Characterization and Modeling of Lithium-Ion Batteries Based on Frequency Selection. Batteries. 2025, 11(1), 1-17. ISSN 2313-0105. DOI 10.3390/batteries11010011.

UŘIČÁŘ, J. et al. Characterization of BTO Ceramic Composite Photocurable Resin for Dielectric Applications. Ceramics International. 2025, 51(25), 45542-45554. ISSN 1873-3956. DOI 10.1016/j.ceramint.2025.07.272. Dostupné z: https://www.sciencedirect.com/science/article/pii/S0272884225035242

POULEK, V. et al. Environmentally Sustainable Recycling of Photovoltaic Panels Laminated with Soft Polysiloxane Gels: Promoting the Circular Economy and Reducing the Carbon Footprint. SUSTAINABILITY. 2025, 17(18), ISSN 2071-1050. DOI 10.3390/su17188167.

PLACHÝ, Z. et al. Underfill: A Review of Reliability Improvement Methods in Electronics Production. Polymers. 2025, 17(16), 1-36. ISSN 2073-4360. DOI 10.3390/polym17162206. Dostupné z: https://www.mdpi.com/2073-4360/17/16/2206

PETER AMALATHAS, A. et al. Synergetic effect of tetraoctylammonium chloride in suppressing photoinduced phase segregation in mixed halide perovskite solar cells. Journal of Alloys and Compounds. 2025, 1027 ISSN 0925-8388. DOI 10.1016/j.jallcom.2025.180533.

PEKÁRKOVÁ, K. et al. Light‐Induced Surface Recombination Suppression, Carrier Lifetime Improvement, and Deep Defect Formation in Lead Halide Perovskites. Laser and Photonics Reviews. 2025, 19(11), 1-10. ISSN 1863-8880. DOI 10.1002/lpor.202401904.

BURDOVA, H. et al. A comprehensive evaluation of the environmental and health risks associated with the potential utilization of chars produced from tires, electro-waste plastics and biomass. Environmental Research. 2025, 264 1-11. ISSN 1096-0953. DOI 10.1016/j.envres.2024.120390. Dostupné z: https://www.sciencedirect.com/science/article/pii/S0013935124022977?via%3Dihub

KLUSOŇOVÁ, N. et al. Impact of particle size distribution on the behaviour of lithium-ion batteries under dynamic operation. Monatshefte für Chemie - Chemical Monthly. 2025, ISSN 1434-4475. DOI 10.1007/s00706-025-03422-5. Dostupné z: https://link.springer.com/article/10.1007/s00706-025-03422-5?utm_source=rct_congratemailt&utm_medium=email&utm_campaign=oa_20251229&utm_content=10.1007%2Fs00706-025-03422-5

CHANG, C.-Y. et al. Facile Interface Engineering Enabled Efficient and Stable Self-Powered Perovskite Photodetectors for Versatile Photosensing Applications. Advanced Functional Materials. 2025, 2025 ISSN 1616-301X. DOI 10.1002/adfm.202422732.

PETER AMALATHAS, A. et al. Polymer-Assisted Crystallization and Defect Passivation in Planar Wide-Bandgap FAPbBr3 Perovskite Solar Cells. ACS Omega. 2025, 10(36), 41515-41523. ISSN 2470-1343. DOI 10.1021/acsomega.5c04987.

KASPER, J. et al. Kinetic model for improved dynamic current response in lithium-ion battery electrical circuit models. MONATSHEFTE FUR CHEMIE. 2025, 156(5), 539-548. ISSN 0026-9247. DOI 10.1007/s00706-025-03294-9.

KONRÁD, P. et al. Analysis of Fiber Content and Orientation in Prefabricated Slab Elements Made of UHPFRC: Non-Destructive, Destructive, and CT Scanning Methods. Materials. 2025, 18(21), 1-25. ISSN 1996-1944. DOI 10.3390/ma18214843.

CARRERA, K. et al. Two-Dimensional Magnetic Orientation of Steel Fibers in Large Slab Elements Made of HPFRC Using an Industrial Robot. Materials. 2025, 19(1), 1-16. ISSN 1996-1944. DOI 10.3390/ma19010125. Dostupné z: https://www.mdpi.com/1996-1944/19/1/125

KLUSOŇOVÁ, N. et al. Thermal stability of valuable metals in lithium-ion battery cathode materials: Temperature range 100–400 °C. Journal of Power Sources. 2025, 627 1-10. ISSN 0378-7753. DOI 10.1016/j.jpowsour.2024.235795.

FINSTERLE, T. et al. The effect of backsheet repairs on insulation resistance in photovoltaic modules. MONATSHEFTE FUR CHEMIE. 2025, 156(5), 559-567. ISSN 0026-9247. DOI 10.1007/s00706-025-03314-8.

HOLÝ, V. et al. Elastic deformation suppresses ion demixing in mixed-halide perovskites. Materials & Design. 2025, 259 ISSN 1873-4197. DOI 10.1016/j.matdes.2025.114850. Dostupné z: https://www.sciencedirect.com/science/article/pii/S0264127525012705

UŘIČÁŘ, J. et al. Polyamide 6 with siloxene or CaSi2: is nanofiller better?. POLYMER ENGINEERING AND SCIENCE. 2025, 65(10), 5435-5444. ISSN 1548-2634. DOI 10.1002/pen.70068. Dostupné z: https://doi.org/10.1002/pen.70068

KUO, M.-H. et al. The Role of Random Texture Scattering on the Absorptance Enhancement in Halide Perovskite Layers. ACS Applied Materials & Interfaces. 2025, 17(35), 49986-49992. ISSN 1944-8244. DOI 10.1021/acsami.5c09757.

BAĎURA, A. et al. Observation of the anomalous Nernst effect in altermagnetic candidate Mn5Si3. Nature Communications. 2025, 16(1), 1-11. ISSN 2041-1723. DOI 10.1038/s41467-025-62331-7. Dostupné z: https://www.nature.com/articles/s41467-025-62331-7

DUŠEK, K. et al. Biodegradable Substrates for Rigid and Flexible Circuit Boards: A Review. Advanced Sustainable Systems. 2025, 9(1), ISSN 2366-7486. DOI 10.1002/adsu.202400518.

SHARMA, R. a J. HOLOVSKÝ. Enhancing Low Illumination Response of SHJ Solar Cells for More Sustainable Systems: A Device Simulation Study. International Journal of Energy Research. 2025, 2025(1), 1-11. ISSN 1099-114X. DOI 10.1155/er/9969335. Dostupné z: https://doi.org/10.1155/er/9969335

PLACHÝ, Z. et al. Board level BGA and CSP Underfill - diagnostic methods and the potential of using a tensile test and subsequent optical microscopy. Polymer Testing. 2025, 149(149), 1-16. ISSN 0142-9418. DOI 10.1016/j.polymertesting.2025.108872.

ALMEHDHAR, A. a R. PROCHÁZKA. Classification of Multiple Partial Discharge Sources Using Time-Frequency Analysis and Deep Learning. Classification of Multiple Partial Discharge Sources Using Time-Frequency Analysis and Deep Learning. 2025, 15(10), ISSN 2076-3417. DOI 10.3390/app15105455. Dostupné z: https://www.mdpi.com/2076-3417/15/10/5455

SEDLÁČKOVÁ, E. et al. Acoustic Emission Technique for Battery Health Monitoring: Comprehensive Literature Review. Batteries. 2025, 11(1), ISSN 2313-0105. DOI 10.3390/batteries11010014. Dostupné z: https://www.mdpi.com/2313-0105/11/1/14

Patenty a užitné vzory

České vysoké učení technické v Praze. Zařízení pro testování elektrochemické migrace. Původci: K. DUŠEK et al. Česko. Patent CZ 310593. 2025-11-27. Dostupné z: https://isdv.upv.gov.cz/doc/FullFiles/Patents/FullDocuments/310/310593.pdf

České vysoké učení technické v Praze. Testovací komora pro testování elektrochemické migrace. Původci: K. DUŠEK et al. Česko. Užitný vzor CZ 38 669. 2025-06-17. Dostupné z: https://isdv.upv.gov.cz/doc/FullFiles/UtilityModels/FullDocuments/FDUM0038/uv038669.pdf

České vysoké učení technické v Praze, Praha 6, Dejvice, CZ. Způsob vybíjení bateriového článku. Původci: A. PRAŽANOVÁ, Z. PLACHÝ a V. KNAP. Česko. Patent CZ 310459. 2025-05-22. Dostupné z: https://isdv.upv.gov.cz/webapp/resdb.print_detail.det?pspis=PT/2024-247&plang=cs

České vysoké učení technické v Praze, Praha 6, Dejvice, CZ. Zařízení pro měření malých impedancí. Původci: V. PAPEŽ. Česko. Patent CZ 310496. 2025-07-03. Dostupné z: https://isdv.upv.gov.cz/doc/FullFiles/Patents/FullDocuments/310/310496.pdf

Články v ostatních periodikách

CTIBOR, P., L. STRAKA a F. LUKÁČ. Composite Dielectrics BaTiO3-Fe Consolidated via Field-Assisted Sintering Technology. John Wiley & Sons iet nanodielectrics. 2025, 8(1), ISSN 2514-3255. DOI 10.1049/nde2.70017.

PRAŽANOVÁ, A. et al. Gate-to-gate life cycle assessment of lithium-ion battery recycling pre-treatment. Cleaner Environmental Systems. 2025, 16 1-12. ISSN 2666-7894. DOI 10.1016/j.cesys.2025.100263.

HAVELLANT, G. et al. Vapour phase reflow soldering with vertical assembly stacking to improve productivity. Results in Engineering. 2025, 25 1-9. ISSN 2590-1230. DOI 10.1016/j.rineng.2025.104414. Dostupné z: https://www.sciencedirect.com/science/article/pii/S2590123025004943

BENDA, V. ISPS 2025. Inovační podnikání. 2025, XXXIII(4/2025), 9-10. ISSN 1210-4612.

BEHNAMI, M. et al. Large Nernst effect in Te-based van der Waals materials. Physical Review Research. 2025, 7(2), 1-9. ISSN 2643-1564. DOI 10.1103/PhysRevResearch.7.023009. Dostupné z: https://journals.aps.org/prresearch/abstract/10.1103/PhysRevResearch.7.023009

Knihy, kapitoly v knihách, skripta, sborníky

BENDA, V. a H.-J. SCHULZE, eds. ISPS'25 PROCEEDINGS. Praha, 2025-08-27/2025-08-29. Prague: Czech Technical University in Prague, Faculty of Electrical Engineering, 2025. 1. sv. 1. ISBN 979-8-3315-5732-4.

NOVÁKOVÁ, K. et al., eds. IECON 2025 – 51st Annual Conference of the IEEE Industrial Electronics Society. Madrid, 2025-10-14/2025-10-17. Madrid: Institute of Electrical and Electronics Engineers (IEEE), 2025. ISSN 2162-4704. ISBN 979-8-3315-9682-8.

Stati ve sbornících konferencí

HOLOVSKÝ, J. et al. PULSED LASER DEPOSITION OF NOVEL SPINEL MATERIALS FOR PHOTOVOLTAIC CONVERSION. In: 16th International Conference on Nanomaterials - Research & Application (NANOCON 2024). Brno, 2024-10-16/2024-10-18. Ostrava: TANGER, 2025. s. 177-181. ISSN 2694-930X. ISBN 978-80-88365-20-4. DOI 10.37904/nanocon.2024.5007.

KUO, M. et al. SELF-ASSEMBLED MONOLAYERS AS HOLE SELECTIVE CONTACTS FOR PEROVSKITE SOLAR CELLS: EXPERIMENT VERSUS SIMULATIONS. In: 16th International Conference on Nanomaterials - Research & Application (NANOCON 2024). Brno, 2024-10-16/2024-10-18. Ostrava: TANGER, 2025. s. 27-32. ISSN 2694-930X. ISBN 978-80-88365-20-4. DOI 10.37904/nanocon.2024.4980.

KOC, D. et al. Impact of Prepreg Thickness and Thermal Stress on Thermomechanical Behavior of Printed Circuit Board Substrates. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2528. ISBN 979-8-3315-1216-3. DOI 10.1109/ISSE65583.2025.11120981. Dostupné z: https://ieeexplore.ieee.org/document/11120981

ZDRÁHAL, J. et al. 3D Printed Circuit Boards from Recycled Plastics: Conductive Pattern Properties. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2536. ISBN 979-8-3315-1217-0. DOI 10.1109/ISSE65583.2025.11121022.

PLACHÝ, Z. et al. Underfill Inspection and Testing in Surface Mount Technology: A Review of Diagnostic and Analytic Methods. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. s. 1-6. International Spring Seminar on Electronics Technology. ISSN 2161-2528. ISBN 979-8-3315-1216-3. DOI 10.1109/ISSE65583.2025.11120978. Dostupné z: https://ieeexplore.ieee.org/document/11120978

KRÁLOVÁ, I. et al. Wetting Balance Test of Tin-Based Solder Alloys: Effect of Oxide Removal on Wetting Performance. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2536. ISBN 979-8-3315-1217-0. DOI 10.1109/ISSE65583.2025.11121031.

HOLOVSKÝ, J. et al. Role of light trapping in the reciprocity between absorptance and photoluminescence in hybrid halide perovskite layers. In: FLIEGEL, K. a V. PRAJZLER, eds. Proc. SPIE 13698, Photonics, Devices, and Systems IX. Photonics Prague 2025, Prague, 2025-06-09/2025-06-11. Bellingham WA: The International Society for Optical Engineering (SPIE), 2025. s. 1369810-1-1369810-7. Proceedings of SPIE. sv. 13698. ISSN 1996-756X. ISBN 978-1-5106-9346-3. DOI 10.1117/12.3076002. Dostupné z: https://www.spiedigitallibrary.org/conference-proceedings-of-spie/13698/1369810/Role-of-light-trapping-in-the-reciprocity-between-absorptance-and/10.1117/12.3076002.full

FROŠ, D., M. HORÁK a M. PLAČEK. Comparison of Thermal Impacts on Performance of LEDs Considering Lighting Fixture Type. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2536. ISBN 979-8-3315-1217-0. DOI 10.1109/ISSE65583.2025.11120955.

NOVÁKOVÁ, K. et al. Module-Level Electrochemical Impedance Spectroscopy analysis for SOH monitoring of Lithium-ion Batteries. In: NOVÁKOVÁ, K. et al., eds. IECON 2025 – 51st Annual Conference of the IEEE Industrial Electronics Society. Madrid, 2025-10-14/2025-10-17. Madrid: Institute of Electrical and Electronics Engineers (IEEE), 2025. s. 1-5. ISSN 2162-4704. ISBN 979-8-3315-9682-8. DOI 10.1109/IECON58223.2025.11221591.

UŘIČÁŘ, J. et al. Coupled Thermogravimetric Techniques for Advanced Polymer Analyses. In: Book of abstracts of the 12th International Conference on Chemical Technology. 12 th International Conference on Chemical Technology, Mikulov, 2025-04-14/2025-04-16. Praha: AMCA, spol. s r.o, 2025. s. 69. ISBN 978-80-88307-24-2. Dostupné z: https://www.icct.cz/cs/Amca-ICCT/media/content/2025/Program/Book_of_abstracts_-ICCT2025.pdf

VESELÝ, P. et al. Novel Ceramic-Polymer Composite for Stereolithography with Enhanced Thermal Conductivity. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2536. ISBN 979-8-3315-1217-0. DOI 10.1109/ISSE65583.2025.11120974.

PROCHÁZKA, R. a J. HLAVÁČEK. Programmable Partial Discharge Calibrator Based on Current Source. In: 2025 IEEE Conference on Electrical Insulation and Dielectric Phenomena (CEIDP). Manchester, 2025-09-14/2025-09-17. Piscataway: Institute of Electrical and Electronics Engineers, 2025. s. 535-538. ISSN 0084-9162. ISBN 979-8-3315-8902-8. DOI 10.1109/CEIDP61707.2025.11218300.

TUČEK, R. et al. Synergistic Use of 3D Printing and Electrochemical Plating to Produce Electrical Discharge Machining Electrodes. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2536. ISBN 979-8-3315-1217-0. DOI 10.1109/ISSE65583.2025.11120912.

HOLOVSKÝ, J. et al. Pulsed Laser Deposition of Novel Spinel Materials for Photovoltaic Conversion. In: 16th International Conference on Nanomaterials - Research & Application (NANOCON 2024). Brno, 2024-10-16/2024-10-18. Ostrava: TANGER, 2025. s. 81. ISSN 2694-930X. ISBN 978-80-88365-20-4.

PAPEŽ, V., J. HÁJEK a S. PAPEŽOVÁ. Contact-less Measurement Method of Minor Carrier Lifetime in Si Monocrystal. In: BENDA, V. a H.-J. SCHULZE, eds. ISPS'25 PROCEEDINGS. 17th INTERNATIONAL SEMINAR ON POWER SEMICONDUCTORS, Praha, 2025-08-27/2025-08-29. Prague: Czech Technical University in Prague, Faculty of Electrical Engineering, 2025. s. 180-187. 1. sv. 1. ISBN 979-8-3315-5732-4. DOI 10.1109/ISPS65707.2025.11189963.

REMEŠ, Z. et al. OPTICAL SPECTRA OF THIN INTRINSIC AND AL DOPED NANOCRYSTALLINE ZNO THIN LAYERS DEPOSITED BY PULSED LASER DEPOSITION ON FUSED SILICA GLASS SUBSTRATES. In: 16th International Conference on Nanomaterials - Research & Application (NANOCON 2024). Brno, 2024-10-16/2024-10-18. Ostrava: TANGER, 2025. s. 291-296. ISSN 2694-930X. ISBN 978-80-88365-20-4. DOI 10.37904/nanocon.2024.5029.

LUKÁŠOVÁ, P. a A. KUBÍN. Optimal Dispatching and Sizing of a Power-to-Heat System with Molten-Salt Thermal Energy Storage for Industrial Heat Decarbonization. In: 2025 IEEE International Conference on Environment and Electrical Engineering and 2025 IEEE Industrial and Commercial Power Systems Europe (EEEIC / I&CPS Europe). International Conference on Environment and Electrical Engineering (EEEIC), Chania, Crete, 2025-07-15/2025-07-18. Institute of Electrical and Electronics Engineers Inc., 2025. ISSN 2994-9440. ISBN 979-8-3315-9515-9. DOI 10.1109/EEEIC/ICPSEurope64998.2025.11169199. Dostupné z: https://ieeexplore.ieee.org/document/11169199

PILNAJ, D. et al. Influence of Stencil Thickness and Surface Finishes of Soldering Pads on the Formation of the Voids Inside Solder Joints. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2536. ISBN 979-8-3315-1217-0. DOI 10.1109/ISSE65583.2025.11120946.

PAZOUREK, J. et al. Fabrication of Piezoelectric Composite Polymers Using Stereolithography. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2536. ISBN 979-8-3315-1217-0. DOI 10.1109/ISSE65583.2025.11121007.

PRAŽANOVÁ, A. et al. Ultrasonic-Assisted Electrode Material Separation: Towards Industrial Applications. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. s. 1-6. International Spring Seminar on Electronics Technology. ISSN 2161-2528. ISBN 979-8-3315-1216-3. DOI 10.1109/ISSE65583.2025.11120972. Dostupné z: https://ieeexplore.ieee.org/document/11120972

PAVLÍČEK, J. et al. Usability Issues in BPMN Models Analyzed Using Eye-Tracking Technology. In: Human Systems Engineering and Design (IHSED2025): Future Trends and Applications. Human Systems Engineering and Design (IHSED2025), Pula, 2025-09-22/2025-09-24. New York: Applied Human Factors and Ergonomics International, 2025. s. 53-62. sv. 198. ISSN 2771-0718. ISBN 978-1-964867-74-8. DOI 10.54941/ahfe1006761. Dostupné z: https://openaccess.cms-conferences.org/publications/book/978-1-964867-74-8/article/978-1-964867-74-8_5

PILNAJ, D. et al. Characterization of Solder Flux by Synergic Combination of Gas Chromatography Coupled to Mass Spectrometry and Fourier-Transform Infrared Spectroscopy. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2536. ISBN 979-8-3315-1217-0. DOI 10.1109/ISSE65583.2025.11121047.

NEYKOVA, N. et al. The Role of the Hole Transport Layer in Perovskite Solar Cells: Simulation and Experimentation Perspectives. In: BOOK OF ABSTRACTS International Conference on Bioactive, Organic and Inorganic Advanced Materials and Clean Technologies. International Conference on Bioactive, Organic and Inorganic Advanced Materials and Clean Technologies, Sofia, 2025-03-24/2025-03-28. University of Chemical Technology and Metallurgy, 2025. s. 32.

BUŠEK, D. et al. Properties of Thin Films on 3D Printed Substrates. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2536. ISBN 979-8-3315-1217-0. DOI 10.1109/ISSE65583.2025.11121009.

KLIMTOVÁ, M. et al. Effect of Fe and Bi Additives on Electrochemical Migration Behavior of SAC105. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2536. ISBN 979-8-3315-1217-0. DOI 10.1109/ISSE65583.2025.11121063.

VLÁŠKOVÁ, K. et al. Thin layer of Chalcogenide Spinel deposited by PLD method. In: FLIEGEL, K. a V. PRAJZLER, eds. Proc. SPIE 13698, Photonics, Devices, and Systems IX. Photonics Prague 2025, Prague, 2025-06-09/2025-06-11. Bellingham WA: The International Society for Optical Engineering (SPIE), 2025. s. 136980F-1-136980F-9. Proceedings of SPIE. sv. 13698. ISSN 1996-756X. ISBN 978-1-5106-9346-3. DOI 10.1117/12.3072755. Dostupné z: https://www.spiedigitallibrary.org/conference-proceedings-of-spie/13698/3072755/Thin-layer-of-chalcogenide-spinel-deposited-by-PLD-method/10.1117/12.3072755.full

UŘIČÁŘ, J. et al. Additively Manufactured Electronic Circuits from Polymer Pastes. In: 2025 International Spring Seminar on Electronics Technology (ISSE). 2025 48th International Spring Seminar on Electronics Technology (ISSE), Budapešť, 2025-05-14/2025-05-18. New York: Institute of Electrical and Electronics Engineers, 2025. International Spring Seminar on Electronics Technology. ISSN 2161-2536. ISBN 979-8-3315-1217-0. DOI 10.1109/ISSE65583.2025.11120915.

Výzkumné zprávy

KNAP, V. a J. SADIL. Report on Milestones - Battery electric vehicle optimizer using complex traction battery model – results description. [Výzkumná zpráva] 2025. Zpráva č. TN02000054/3-V12.

KNAP, V. a J. SADIL. Report on Milestones - Quick diagnostic for automotive batteries via impedance measurements – results description. [Výzkumná zpráva] 2025. Zpráva č. TN02000054/3-V13.